Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 67)

2-37
IM 04L31A01-17E
2
Ethernet Interface
Click the selection button to choose
the message.
Response from the CX for the
message setting/writing operation.
Enter the message string.
Cancel the string.
Set/write the message.
12. Click the message number button to select the message.
13. Enter the message string (up to 16 alphanumeric characters) in the message
box and click [Set & Write].
The message on the CX is set, and the message appears on the trend display
on the CX. The message is also written to the internal memory.
To cancel the operation, click [Cancel].
Note
• The message is displayed on the trend display and written to the internal memory only when
the data write operation to the internal memory is in progress on the CX (the message is set
regardless of whether or not the data write operation to the internal memory is in progress).
• The response to the message setting and writing operations is displayed in the command
response section.
Switching Displays
14. Click [Select group] of the trend, digital, bar graph, controller, faceplate, or
hybrid display in the display switch section to select the group. The CX screen
changes to the specified display. The operator page is also refreshed. On
models with the program control option (/PG1 or /PG2), you can also switch to
the program selection display and the program control display.
CX2000 screen example
Switching Displays Using the DISP/ENTER Key and Arrow Keys
You can switch the trend, digital, bar graph, controller, faceplate, and hybrid displays.
15.
Click the DISP/ENTER key or arrow keys that are displayed on the operator
page to operate the CX in the same fashion as the corresponding keys on the
CX. The operator page is also refreshed.
2.10 Using the Monitor Page and Operator Page