Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 34)

2-4
IM 04L31A01-17E
• Domain suffix
When the IP address corresponding to the server name with the domain name
of the previous section is not found, the system may be set up to search using a
different domain name. In such case, set the domain name to be searched
following the “domain name” of the previous section as a domain suffix.
• Enter the name using up to 64 alphanumeric characters.
• You can specify up to two domain suffixes, primary and secondary.
Selecting the Communication Type Used to Output the Data in the Internal Memory
and Files on the External Storage Medium
• Select the communication type used to output the data in the internal memory of
the CX (display, event, TLOG, manual sample, and report data) and the files on the
external storage medium using output commands (ME, MI, and MO commands).
Since Ethernet communications and serial communications cannot be used
simultaneously as an output destination , either one must be selected.
• To use the Ethernet interface, select [Ethernet].
Saving the Settings
To activate the settings that have been changed in the basic setting mode, the
settings must be saved. Otherwise, the settings that existed before the change are
activated.
2.3 Configuring of the Ethernet Interface