Connector pin arrangement and signal names, Connection procedure – Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 82
3-2
IM 04L31A01-17E
3.2
Connector Pin Arrangement and Signal
Names, Connection Procedure, and
Handshaking Methods of the RS-232 Interface
Connector Pin Arrangement and Signal Names
Connector Pin Arrangement
2
1
3 4 5
6 7
9
8
(Rear panel)
Pin No.
Signal Name
Meaning
2
RD (Received Data)
Received data from the PC. Input signal to the CX.
3
SD (Send Data)
Transmitted data to the PC. Output signal from the CX.
5
SG (Signal Ground)
Signal ground.
7
RS (Request to Send)
Handshaking signal when receiving data from the PC.
Output signal from the CX.
8
CS (Clear to Send)
Handshaking signal when transmitting data to the PC. Input
signal to the CX.
*
Pins 1, 4, 6, and 9 are not used.
Serial (RS-232) Standard Signals and Their JIS and ITU-T Abbreviations
Pin No.
(9-pin connector)
Abbreviation
RS-232
Description
ITU-T
JIS
5
3
2
8
7
AB (GND)
BA (TXD)
BB (RXD)
CB (CTS)
CA (RTS)
102
SG
103
104
106
105
SD
RD
CS
RS
Signal ground
Transmitted data
Request to send
Received data
Clear to send
Connection Procedure
Signal Direction
PC
CX
RS [Request to send]
SD [Send data]
RD [Receive data]
2
3
8
7
CS [Clear to send]