Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 46)

2-16
IM 04L31A01-17E
2.6 FTP Test
Explanation
You can test whether files can be transferred via the Ethernet interface by transferring a
test file from the CX to the FTP server specified in section 2.5
Items to Check before Performing This Test
• Connect the Ethernet cable correctly. For the connection procedure, see section
2.2.
• Check that the Ethernet interface settings are correct. For the procedure, see
section 2.3 or 2.5.
When setting the Ethernet interface, check the settings with your system or network
administrator.
Checking the Results of the FTP Test
• When you execute the FTP test, the test file named CX_FTPC.TXT is transferred
to the directory indicated by the initial path at the FTP destination specified in
section 2.5.
• The result of the FTP test can be confirmed by displaying the FTP log (displayed
on the CX (see section 2.8)) or Web screen (see section 2.10) or by outputting the
result using the FL command (see section 6.11).
Procedure
Performing the FTP Test
1. Press the FUNC key.
The FUNC menu appears. The structure of the FUNC menu varies depending
on the basic settings and options.
2. Press the [FTP test] soft key to display the batch screen.
A destination selection menu for performing the FTP test appears.
3. Press the [Primary] or [Secondary] soft key.
The FTP test of the selected FTP server is executed.