Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 312)

App-53
IM 04L31A01-17E
App
Appendix
Code Message
285 FTP data connection error.
Further details are provided by the character string that appears after error code 285.
Character String and Details
SOCKET
Failed to create a socket for the transfer connection. *2
BIND
Failed the transfer connection command. *2
CONNECT
Failed the transfer connection. *2
LISTEN
Failed the transfer connection reception. *2
ACCEPT
Failed to accept the transfer connection. *2
SOCKNAME
Internal processing error. *2
RECV
Failed to receive data over the transfer connection. *2
SEND
Failed to send data over the transfer connection. *2
286 FTP file transfer error.
Further details are provided by the character string that appears after error code 286.
Character String and Details
READ
Internal processing error. *1
WRITE
Internal processing error. *1
*1 Contact your nearest YOKOGAWA dealer.
*2 These errors may occur if the network experiences trouble during the data transmission (bad cable connection, duplicate
addresses, network equipment failure).
Note
• The FTP client function on the CX has a timer function that drops the connection if there is no
data transfer for two minutes. If the server does not respond within this time period, the
transfer fails.
• If the FTP client function on the CX detects a file with the same name at the destination, the
file is transferred with the last character (8th character) of the file name changed.
Appendix 7 Messages