Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 78)

2-48
IM 04L31A01-17E
2.13 Starting/Stopping E-mail Transmissions
Explanation
Starting/Stopping E-mail Transmissions
• If the e-mail transmission is started, the e-mail transmission function is activated.
• If the e-mail transmission is stopped, e-mail transmission is disabled. Unsent e-
mail messages are cleared.
Note
• If the CX enters the basic setting mode while the e-mail transmission is started, the e-mail
transmission is stopped. If the CX returns to the operation mode from the basic setting mode,
the condition that existed before entering the basic setting mode is resumed.
• If e-mail transmission fails, the message is retransmitted up to twice at 30-s intervals. If
retransmission fails, the e-mail message is discarded.
Contents of the E-mail Message
The figure below shows examples of an e-mail messages.
From: [email protected]
Date: Sun, 24 Dec 2000 13:08:23 +0900 (JST)
Subject: (CX) Alarm_summary
To: [email protected], [email protected]
LOOP1
TEMPERATURE
Alarm summary.
<Host name>
CX
<CH>03
<Type>1R
<On>Dec.24 13:05:16
<Off>Dec.24 13:08:17
<Inst. value>
Dec.24 13:08:17
01=-0.312V
02=-0.267V
03=-0.245V
.
.
29=-0.645V
30=-0.649V
Access the following URL in order to look at
http://CX.good.com/
Alarm e-mail
Subject
Header1
Alarm no./type
Channel no.
Alarm occurrence/
release date/time
Instantaneous
values (when
included)
• Date/Time
• Channel number
• Inst. value
Sender URL
(when inluded)
Header2
From: [email protected]
Date: Sat, 23 Dec 2000 01:00:09 +0900 (JST)
Subject: (CX) Periodic_data
To: [email protected]
LOOP1
Scheduled
Periodic data.
<Host name>
CX
<Time>
Dec.23 01:00:01
Scheduled e-mail
Subject
Header1
Header2
From: [email protected]
Date: Sat, 23 Dec 2000 07:31:58 +0900 (JST)
Subject: (CX) System_warning
To: [email protected], [email protected]
LOOP1
RAW MATERIAL
Power failure.
<Host name>
CX
<Power fail>Dec.23 07:30:12
<Power on>Dec.23 07:31:32
System e-mail (power recoery)
Subject
Header1
Cause of e-mail
transmission
Details
Header2
From: [email protected]
Date: Sat, 23 Dec 2000 23:00:09 +0900 (JST)
Subject: (CX) Report_data
To:[email protected], [email protected]
LOOP1 DAILY
RAW MATERIAL
Hourly report.
<Host name>
CX
Dec.23 23:00:00
<CH>01
<Ave>-0.226
<Max>0.698
<Min>-0.972
<Sum>-1.537000E+01
<Unit>V
<CH>02
<Ave>-0.225
<Max>0.700
<Min>-0.971
.
Report e-mail
Subject
Header1
Date/time
Channel no.
Report data
• Average
• Maximum
• Minimum
• Sum
• Unit
Header2