Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 79)

2-49
IM 04L31A01-17E
2
Ethernet Interface
Procedure
Starting the E-mail Transmission
1. Press the FUNC key.
The FUNC menu appears. The structure of the FUNC menu varies depending
on the basic settings and options.
2. Press the [E-Mail START] soft key.
The e-mail transmission function is enabled. An e-mail transmission function
icon is displayed in the status indication section of the CX.
Stopping the E-mail Transmission
1. Press the FUNC key.
The FUNC menu appears. The structure of the FUNC menu varies depending
on the basic settings and options.
2. Press the [E-Mail STOP] soft key. E-mail transmission is stopped. The e-mail
transmission function icon disappears from the status indication section of the
CX.
Note
[E-Mail START] and [E-Mail STOP] appears in the FUNC key menu, if recipient 1 or recipient 2 is
On in Alarm E-Mail settings, Scheduled E-Mail settings, System E-Mail settings, or Report E-Mail
settings.
2.13 Starting/Stopping E-mail Transmissions