Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 243
9-10
IM 04L31A01-17E
Procedure
For the basic flow of operation, see “Setup Procedure Using Operation Keys” on page ix.
1.
Press the MENU key.
The Setting mode (Control) display appears.
2.
Press the FUNC key for approximately 3 s.
The Basic setting menu appears.
3.
Press the [#10] (Control) soft key ([#12] (Control) soft key on the CX1000).
The Control menu appears.
4.
Press the [#6] (External loop setting) soft key ([#8] (External loop setting) soft
key on the CX1000).
The Control (External loop setting) menu appears.
5.
Press the [#1] (Basic setting) soft key.
The External loop setting (Basic setting) display appears.
CX2000 External loop setting (Basic setting)
display (when Comm. is set to On)
CX1000 Basic setting display
(when Comm. is set to On)
Selecting the Loop Number
6.
Use the arrow keys to move the cursor to the [Loop number] box.
7.
Press one of the soft keys from [Ext1] to [Ext16] ([Ext1] to [Ext4] on the CX1000)
to select the external loop number.
Turning Off/On Communications
8.
Use the arrow keys to move the cursor to the [Comm. On/Off] box.
9.
Press the [Off] or [On] soft key.
If you selected [On], proceed to step 10; if you selected [Off], proceed to step 26.
9.4 External Loop Setting > Basic Setting