Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 230)

7-38
IM 04L31A01-17E
Decimal point position
The decimal point position of each channel’s input span
Lower limit of span
The lower limit value of each channel’s input span
Upper limit of span
The upper limit value of each channel’s input span
Note
• Information for skipped channels, or channels when control is turned OFF is not output.
• For channels belonging to loops set for analog retransmission, only information for OUT
channels is output. PV/SP channel information is not output.
7.3 Output Format of BINARY Data