Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 71)

2-41
IM 04L31A01-17E
2
Ethernet Interface
Procedure
For the basic flow of operation, see “Setup Procedure Using Operation Keys” on page
ix. For the procedure of entering characters and numbers, see the user’s manual IM
04L31A01-01E
or IM 04L31A01-03E.
1. Press the MENU key.
The setting mode (control) display appears.
2. Press the FUNC key for approximately 3 s.
The basic setting menu appears.
3. Press the [#8] (Web, E-Mail) soft key ([#10] (Web, E-Mail) soft key on the
CX1000).
The Web, E-mail setting menu appears.
Setting [Basic E-Mail settings]
4. Press the [#2] (Basic E-Mail settings) soft key .
The Web, Email (Basic E-Mail settings) display appears.
CX2000 Web, Email (Basic E-Mail settings) display CX1000 Basic E-Mail settings display
• Setting the SMTP server name
5.
Use the arrow keys to move the cursor to the [SMTP server name] box.
6. Press the [Input] soft key. An entry box (numeric value input pop-up window)
appears.
7. Enter the SMTP server name in the entry box.
8. Press the DISP/ENTER key. On the CX1000, select [ENT] and then press the
DISP/ENTER key. The SMTP server name that you entered appears in the
[SMTP server name] box.
• Setting the port number
9.
Use the arrow keys to move the cursor to the [Port number] box.
2.11 Setting the E-mail Transmission Function