Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 93)

3-13
IM 04L31A01-17E
Serial Interface
3
Selecting the Communication Type Used to Output the Data in the Internal Memory
and Files on the External Storage Medium
17. Use the arrow keys to move the cursor to the [Memory output] box.
18. Press the [Ethernet] or [Serial] soft key. To use the serial interface, press the
[Serial] soft key.
Confirming or Canceling the Settings
19. To confirm the new settings, press the DISP/ENTER key. To cancel the
settings, press the ESC key.
For a detailed procedure in confirming or canceling settings, see “Setup Procedure Using
Operation Keys” on page ix.
Saving the Settings
20. Press the ESC key several times to display the basic setting menu.
21. Press the [End] soft key.
A dialog box appears for you to select whether to save the settings.
22. To save the settings, select [Yes]. To not save the settings, select [No]. To
return to the basic setting menu, select [Cancel]. Then, press the DISP/ENTER
key.
3.5 Configuring the Serial Interface