Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 43)

2-13
IM 04L31A01-17E
Ethernet Interface
2
Setting the Primary FTP Connection
On the CX1000, if you confirmed the settings in step 8, press the ESC key to return to
the communication function setting menu of step 4. Then, press the [#4 (FTP
connection)] soft key.
9.
Use the arrow keys to move the cursor to the [FTP connection] box.
10. Press the [Primary] soft key.
• Setting the FTP server name
11.
Use the arrow keys to move the cursor to the [FTP server name] box.
12. Press the [Input] soft key. An entry box (numeric value input pop-up window)
appears.
13. Enter the primary FTP server name in the entry box.
Normally, an IP address is entered. If the DNS is setup, you can also enter the
host name of the FTP server.
14. Press the DISP/ENTER key. On the CX1000, select [ENT] and then press the
DISP/ENTER key.
The FTP server name that you entered appears in the [FTP server name] box.
• Setting the port number of the FTP server
15.
Use the arrow keys to move the cursor to the [Port number] box.
16. Press the [Input] soft key. An entry box appears.
17. Enter the port number of the primary FTP server in the entry box.
18. Press the DISP/ENTER key. On the CX1000, select [ENT] and then press the
DISP/ENTER key.
The port number that you entered appears in the [Port number] box.
• Setting the login name for accessing the FTP server
19.
Use the arrow keys to move the cursor to the [Login name] box.
20. Press the [Input] soft key. An entry box appears.
2.5 Setting the FTP Client (Setting the Automatic Transfer of Display, Event, and Report Data Files)