Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 24)

1-7
IM 04L31A01-17E
Functional Explanation
1
DAQSTANDARD for CX
By using the DAQSTANDARD for CX, you can easily use the setting/measurement
server, maintenance/test server, and instrument information server that are connected
via the Ethernet network without having to create programs such as BASIC.
The software enables setting of the CX and displaying of data from a PC connected to
the network. Below are the functions provided by the DAQSTANDARD for CX.
• Hardware Configurator
The Hardware Configurator can be used to send to the CX various types of data such
as settings related to control, settings related to measurement channels and
computation channels, and settings related to the display. Conversely, setup data
from the CX can be received and stored to the hard disk in your PC.
• Data Viewer
The Data Viewer can be used to display the data of files that the CX created on trend
displays, digital displays, circular displays, and lists. The data can also be printed. In
addition, you can use the cursor to confirm display data values, perform computation
over a specified interval, and convert the data into ASCII format or file formats that
can be opened using EXCEL/Lotus1-2-3.
• Program Pattern Editing (This function cannot be used on the current product
that you are using. The information may also change in the future.)
The program control patterns for internal control loops of the CX can be created and
edited using a graphical interface.
1.2 Ethernet Communication Function