Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 132)

6-3
IM 04L31A01-17E
Command
6
Response
The CX returns a response (affirmative/negative response) to a command that is
delimited by a single terminator.* The controller should follow the one command to one
response format. When the ommand-response rule is not followed, the operation is not
guaranteed. For the response syntax, see section 7.1.
* Commands dedicated to RS-422/485 (see section 6.12) and instrument information output
commands (section 6.15) are exceptions.
6.1 Command Syntax