3 setting the date and time, Setting the date and time -11 – Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 152
Advertising
3-11
IM 04L31A01-01E
Names of Parts, Display Modes, and Common Operations
3
3.3
Setting the Date and Time
This section explains how to set the date, time, and the daylight savings function of the
CX2000 internal clock.
Procedure
Opening the Setting Display
• Setting the Date and Time
Press the keys in the following sequence:
MENU key
(switch to Set mode) >
#6 soft key
(select [Time])
From the operation display, use the above keys to open the following setting dialog
box.
• Setting Daylight Savings Time
Press the keys in the following sequence:
MENU key
(switch to setting mode (Control)) >
MENU key
(switch to Set mode) >
#3 soft key
(select [Trend/Save interval,Message,File,User key,DST])
The following display appears.
Advertising