Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 222)

5-13
IM 04L31A01-01E
Program Control Related Setup Operations
5
Setup Item
Event Output Settings
• Pattern number (Version 3.02 or later)
Displayed when event output is set for each program pattern. Select a program
pattern number for which to set event output.
If this item is not displayed, the event output is common to all program patterns.
• Event Types
Select whether to set event output for PV event or time event.
• Relay Output
Turn the relay output ON or OFF.
• Number
Select relay output terminal numbers from the following.
DO001-006, DO101-106, DO201-206, RO001-012 (only with the control DIO
expansion terminal block), SW001-SW036 (internal switches, style number S3 or
later)
• Action
Displays the relay output action (energize/de-energize) per the settings.
Program Pattern End Signal Setting (Not Per Pattern, but Overall)
• Relay Output
Turn the relay output ON or OFF.
• Number
Select relay output terminal numbers from the following.
DO001-006, DO101-106, DO201-206, RO001-012 (only with the control DIO
expansion terminal block), SW001-SW036 (internal switch, style number S3 or later)
• Action
Displays the relay output action (Energize/Deenergize) per the settings.
5.9 Event Output Settings