Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 330)

11-16
IM 04L31A01-01E
Setup Items
Application name
Enter the application name (up to 16 characters).
Supervisor name
Enter the supervisor name (up to 16 characters).
Manager name
Enter the manager name (up to 16 characters).
Batch number
Enter the batch number (up to 16 characters).
Lot number
Enter the lot number (0-9999).
Auto increment (Automatic increment of the lot number)
Set whether or not to automatically increment the lot number (to the next lot number)
when the data acquisition to the internal memory is complete.
[On]: Automatically increment the lot number when the data acquisition is complete.
[Off]: Do not change the lot number.
Note
The lot number after 9999 is 0.
Disp information (Displayed information of the stored data)
Set whether to display the batch number and lot number or the date and time of file
creation on the memory summary, display data load, and event data load screens.
[Batch]: Display the batch number and lot number.
[Time]: Display the date and time of file creation.
11.7 Setting the Batch Information (/BT1 option)