Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 187)

4-27
IM 04L31A01-01E
Control Function Related Setup Operations
4
4.10 Control group setting
This section explains the procedures for setting groups for the control function.
Procedure
Opening the Setting Display
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > #5 soft key (select [Control group
setting])
The following display appears.
Setup Procedure
1. Use the arrow keys to move the cursor (blue) to the item box you wish to change.
A soft key menu is displayed at the bottom of the display.
2. Press the soft key corresponding to the value you wish to select.
The box for the item you changed turns yellow, and the cursor moves to the next
item box.
3. Repeat steps 1 and 2 to change the value of all the items you wish to change.
4. Press the
DISP/ENTER key to confirm the changes.
The boxes for the items you changed turn from yellow to white, and the cursor
returns to the first item box.
Setup Items
Control group setting
• Group number
Select the group number form 8 group numbers from [1] to [8].
• Group name
Set the group name using up to 16 alphanumeric characters.
Group name display example
Group name