Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 316)

11-2
IM 04L31A01-01E
Setup Items
Assigning a Function to the USER Key
Select one of the following actions. The initial value is [AlarmACK].
Name of Action Reference Action
None – No operation.
Trigger 9.1 Supplies a trigger used to start acquiring event data to the
internal memory (valid only when event data is specified to be
acquired to the internal memory and the trigger used to start the
acquisition is set to key trigger).
AlarmACK 4.7, 7.2 Clears the alarm indication/relay output (valid only when the
operation of the alarm indication or output relay is set to “Hold”).
MathStart/Stop 10.2 Starts/stops computation (only for models with the computation
function option (/M1))
MathReset 10.2 Resets the computed data (resets to 0, only on models with the
computation function option (/M1) while the computation is
stopped).
ManualSample 9.2 Writes the instantaneous values of all channels to the internal
memory once.
Message1 to 8 8.9 Displays the message (1 to 8) on the trend display and write it to
the internal memory.
Snapshot 9.6 Saves the current screen image data to the external storage
medium.
11.1 USER Key Assignment and Operation