Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 82)

1-70
IM 04L31A01-01E
(When set to display data only)
(When set to [Free])
(When set to [Trigger] or [Rotate])
1
8
5
9 11
10
3
4 7
2
6
A
B
C
E
F
G
H
D
Program control
in progress
Data acquisition
to the internal
memory in
progress
1. User name
The user name is displayed when the key login function is used and the user is logged in.
2. Group name or display name
The display name or group name corresponding to the display shown on the data display
section. [ALL] is displayed only when all channels are displayed on the trend display.
3. Current date and time
The current date and time are displayed.
On models with the optional /BT1 batch header, the “date and time” and “batch
number and lot number” are alternately displayed every 5 s when “Use Batch
Header” (see section 11.6) is being set.
4. Data acquisition to the internal memory ON/OFF
A and B is alternately displayed: Data being acquired or waiting for a trigger for event data.
C: Data acquisition stopped
D: When the control mode is set to a mode other than [Off] and the program control
is ON, program control RESET (red)/RUN (green) status is indicated in addition
to the ON/OFF status of the data acquisition to the internal memory.
Note
For event data that starts sampling when the trigger condition is met, the display indicates
that sampling is in progress even in the trigger wait state. The trigger wait state can be
determined on the bar graph.
5. Memory usage of the display data acquisition area in the internal memory
Displayed when acquisition of display data is enabled.
• Bar graph
Indicates the amount of display data acquisition area that is being used.
• Time display
Remaining time of the display data acquisition area. When the remaining time
becomes short, the time is displayed in units of minutes.
Remaining time Unit
100 days or more % (Percentage of the remaining area in the display data acquisition area)
100 hours or more to Days (time unit less then one day is truncated)
less than 100 days
60 minutes or more to Hours (time unit less then one hour is truncated)
less than 100 hours
Less than 60 minutes Minutes (time unit less then one minute is truncated)
1.16 Display Function