Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 308
10-9
IM 04L31A01-01E
Computation and Report Function Related Operations
(Only on Models with the Computation Function Option)
10
Operations on the Display
• Setting the timer
1. Use the
arrow keys
to move the cursor (blue) to the entry boxes under
[Timer(TLOG)].
2. Press the
soft key
to set the values.
3. Press the
DISP/ENTER key
.
• Selecting the Timer and Sum Scale
1. Use the
arrow keys
to move the cursor (blue) to the [First-CH] and [Last-CH]
boxes.
2. Press the
soft key
corresponding to the start and end channel numbers for
setting the TLOG computation.
3. Use the
arrow keys
to move the cursor to the [Timer No.] or [Sum scale] box
under [TLOG].
4. Select the value using the
soft key
.
5. Press the
DISP/ENTER key
.
Saving the Settings in Basic Setting Mode
1. Press the
ESC key
.
The display returns to basic setting menu.
2. Press the
[End] soft key
.
A confirmation dialog box appears
3. Select [Yes] and press the
DISP/ENTER key
.
The operation screen is displayed.
Setup Items
Setting Timer for TLOG Computation
• Mode
Select either [Relative] or [Absolute].
When Relative Is Selected
• Interval
Set the time until the end of the interval in “hour:minute” (00:01 to 24:00).
• Reset
Set whether to reset the TLOG computation value at every interval [On] or [Off].
• Action
If set to [DataSave], the instantaneous values of all measurement/computation
channels are written to the internal memory at every interval. Select [Off] to disable
this function.
When Absolute Is Selected
• Interval
Set the time until the end of the interval from the following 19 types.
1min, 2min, 3min, 4min, 5min, 6min, 10min, 12min, 15min, 20min, 30min, 1h, 2h,
3h, 4h, 6h, 8h, 12h, and 24h
• Ref. time
Set the time to be used as the reference. The reference time is set in the range of
0:00 to 23:00 at 1 hour steps.
• Reset
Set whether to reset the TLOG computation value at every interval [On] or [Off].
• Action
If set to [DataSave], the instantaneous values of all measurement/computation
channels are written to the internal memory at every interval. Select [Off] to disable
this function.
10.4 Setting TLOG Computations