Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 311
Advertising
10-12
IM 04L31A01-01E
Note
•
If the number of data points to be averaged has not reached the specified number of
samples immediately after computation is started, the average of the available data is
calculated.
•
Computation error data is excluded from the rolling average computation.
•
If the computed data exceeds the upper or lower limit, the data is clipped at the upper or
lower limit, and the rolling average is computed. The upper and lower limit is
“±100000000” excluding the decimal point. The decimal point position is the same as that
of the span lower limit.
10.5 Setting the Rolling Average
Advertising