Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 290)

9-6
IM 04L31A01-01E
Setting the File Header/Directory Name, and the Data to Be Saved during Manual
Save Operation.
• File
• Header
Enter the header comment to be written to the display data/event data using up to
32 alphanumeric characters. The specified header is written to all display data,
event data, manual sample data, TLOG data (option), and report data (option) files.
• Director name
Set the name of the directory for saving the data on the external storage medium.
All the data excluding the setup data (display data, event data, manual sample
data, TLOG data, report data (only on models with the computation function
option), and screen image data) are saved to the specified directory. The setup
data is saved to the root directory. The save destination directory varies depending
on how the data is saved.
Auto save:
Directory specified here.
Manual save: Directory with a sequence number added to the string
specified here.
Save using key operation: Directory with “A+sequence number” added to the
character string specified here (the sequence number is
incremented every time data is saved. For example, if
the specified directory name is “DATA0,” the first key
operation saves the data to the “DATA0.A00” directory.
The second key operation saves the data to the
“DATA0.A01” directory.)
• Save data (only when [Save] is set to [Manual])
Set how data is to be saved when the external storage medium is inserted into the
drive in manual save mode. Select [All], which saves all the data in the internal
memory, or [Unsave], which saves only the data that has not been saved. The
data that is saved is display data, event data, manual sample data, TLOG data,
and report data (only on models with the computation function option).
9.1 Acquiring Measurement Data to the Internal Memory and Saving Data to the External Storage Medium