Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 262)

8-5
IM 04L31A01-01E
Operations for Changing the Displayed Contents
8
8.4 Measurement Function > Settings Related to
Tag Display for Channels
This section explains how to set and display tag names that can be displayed in place of
channel numbers.
Procedure
Opening the Setting Display
• Setting Tag Names That Is to Be Displayed in Place of Channel Numbers
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > MENU key (switch to Set mode) >
#2 soft key (select [Tag,Moving average,Alarm delay])
The following display appears.
• Displaying Tag Names in Place of Channel Numbers
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > Hold down the FUNC key for 3
seconds (switch to basic setting mode) > #9 soft key (select [Aux,Time zone])
The following display appears.