Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 307)

10-8
IM 04L31A01-01E
10.4 Setting TLOG Computations
This section explains how to set the TLOG computation.
Procedure
Displaying the Operation Display
• Setting the timer
Press the keys in the following sequence:
MENU key (switch to Set mode) > Hold down the FUNC key for 3 seconds
(switch to basic setting mode) > #6 soft key (select [Option])
The following display appears.
• Selecting the Timer and Sum Scale
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > MENU key (switch to Set mode) >
#8 soft key (select [Math set2(Tag,TLOG,Rolling average,Alarm delay)])
The following display appears.