Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 157)

3-16
IM 04L31A01-01E
3.7 Changing the Time Zone
This section explains how to set the time difference with respect to Greenwich Mean
Time. Make sure to set this value if you are using the Web server function.
Procedure
Opening the Setting Display
Press the keys in the following sequence:
MENU key (switch to Set mode) > Hold down the FUNC key for 3 seconds (switch
to basic setting mode) > #9 soft key (select [Aux])
The following setting display appears.
Setup Procedure
1. Use the arrow keys to move the cursor (blue) to the [Difference from GMT] box
under [Time zone].
[Input] is displayed at the bottom of the display.
2. Press the [Input] soft key .
3. Enter the time difference using the character/number input keys and soft keys .
4. Press the DISP/ENTER key .
5. Press the DISP/ENTER key to confirm the changes.
Saving the Settings
1. Press the ESC key .
The display returns to basic setting menu.
2. Press the [End] soft key .
A confirmation window appears.
3. Select [Yes] and press the DISP/ENTER key .
Setup Items
Set the time difference with respect to Greenwich Mean Time from –1200 to 1200 (the
upper two digits indicate the hour; the lower two digits indicate the minute).
Example: The standard time in Japan is ahead of the Greenwich Mean Time by 9 hours.
In this case, enter “900.”