Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 299)

9-15
IM 04L31A01-01E
Data Save/Load Operations
9
9.7 Clearing the Data in the Internal Memory
This section explains how to clear all the data in the internal memory including display
data, event data, manual sample data, TLOG data (optional function data), and report
data (optional function data).
Procedure
Opening the Operation Dialog Box
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > MENU key (switch to Set mode) #5 soft
key (select [Save/Load,Clear data]) > #9 soft key (select [Clear data])
From the operation display, use the above keys to open the following display box.
Operations on the Display
Select [Yes] and press the DISP/ENTER key .
The data is cleared. To cancel the operation, select [No] using the right arrow key
and press the DISP/ENTER key.
Note
The data acquired in the internal memory is also cleared when memory-related settings are
changed in basic setting mode. In this case, the following confirmation dialog box appears.