Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 156)

3-15
IM 04L31A01-01E
Names of Parts, Display Modes, and Common Operations
3
3.6 Changing the Displayed Language
This section explains how to change the language used on the display.
Procedure
Opening the Setting Display
Press the keys in the following sequence:
MENU key (switch to Set mode) > Hold down the FUNC key for 3 seconds (switch
to basic setting mode) > #9 soft key (select [Aux])
The following setting display appears.
Setup Procedure
1. Use the arrow keys to move the cursor (blue) to the [Language] box.
[English], [Japanese], [German], [French], and [Chinese] appear in the soft key
menu at the bottom of the display.
2. Press the [English], [Japanese], [German], [French], or [Chinese] soft key .
The [Language] box turns yellow, and the cursor moves to the next item.
3. Press the DISP/ENTER key to confirm the changes.
The boxes for the items you changed turn from yellow to white, and the cursor
returns to the first item box.
Saving the Settings
1. Press the ESC key .
The display returns to basic setting menu.
2. Press the [End] soft key .
A confirmation window appears.
3. Select [Yes] and press the DISP/ENTER key .