Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 266
8-9
IM 04L31A01-01E
Operations for Changing the Displayed Contents
8
8.6
Measurement Function > Operations When
Displaying the Overview
This section explains the operations that you can perform when displaying the overview.
Overview cannot be selected on 0 measurement channel models without the calculation
option installed.
Procedure
Turning OFF the Cursor
1. Press the
DISP/ENTER key
to show the display selection menu.
[OVERVIEW] is highlighted.
2. Press the
right arrow key
to display the sub menu.
3. Select [CURSOR OFF] using the
up and down arrow keys
.
4. Press the
DISP/ENTER key
to confirm the change.
Switching to Trend Display or Bar Graph Display
1. Select the desired channel using the
arrow keys
.
2. Press the
DISP/ENTER key
to show the display selection menu.
[OVERVIEW] is highlighted.
3. Press the
right arrow key
to display the sub menu.
4. Select [JUMP TO TREND] or [JUMP TO BAR] using the
up and down arrow
keys
.
5. Press the
DISP/ENTER key
to switch to the trend or bar graph display.