Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 193)

4-33
IM 04L31A01-01E
Control Function Related Setup Operations
4
4.13 Hysteresis (Alarm)
This section explains the control function’s hysteresis alarm setting procedure.
Procedure
Opening the Setting Display
Press the keys in the following sequence:
MENU key (switch to setting mode(control)) > #7 soft key (select [Detailed setting]
(DIO monitor and operation, etc...), #8 soft key when program control is ON) > #2
soft key (Hysteresis (Alarm))
The following display appears.
Setup Procedure
1. Use the arrow keys to move the cursor (blue) to the item box you wish to
change.
A soft key menu is displayed at the bottom of the display.
2. Press the soft key corresponding to the value you wish to select.
The box for the item you changed turns yellow, and the cursor moves to the next
item box.
3. Repeat steps 1 and 2 to change the value of all the items you wish to change.
Note
For setup item boxes that require values to be entered, a pop-up window that appears by
pressing the [Input] soft key is used.
4. Press the DISP/ENTER key to confirm the changes.
The boxes for the items you changed turn from yellow to white, and the cursor
returns to the first item box.