Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 317)

11-3
IM 04L31A01-01E
Operations of Other Functions
11
11.2 Key Lock
This section explains how to disable/enable the key operation (including Zip disk ejection
and data save operation in manual save mode).
Procedure
Opening the Setting Display
Press the keys in the following sequence:
MENU key (switch to Set mode) > Hold down the FUNC key for 3 seconds (switch
to basic setting mode) > #3 soft key (select [Keylock])
The following display appears.
Setup Procedure
1. Use the arrow keys to move the cursor (blue) to the item box you wish to change.
A soft key menu is displayed at the bottom of the display.
2. Press the soft key corresponding to the value you wish to select.
The box for the item you changed turns yellow, and the cursor moves to the next
item.
3. Repeat steps 1 and 2 to change the value of all the items you wish to change.
4. Press the
DISP/ENTER key to confirm the changes.
The boxes for the items you changed turn from yellow to white, and the cursor
returns to the first item box.
Saving the Settings in Basic Setting Mode
1. Press the ESC key .
The display returns to basic setting menu.
2. Press the [End] soft key .
A confirmation dialog box appears
3. Select [Yes] and press the DISP/ENTER key .
The operation screen is displayed.
Keylock
1. In operation mode, press the FUNC key .
The soft key menu is displayed. The [Keylock] soft key does not appear if the
Keylock Use/Not setting is [Not].