Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 194
Advertising
4-34
IM 04L31A01-01E
Setup Item
Hysteresis Settings
• Alarm
• Loop number
You can enter the alarm setting for each loop. When changing these settings,
select a loop to be changed from 1 to 6 (default is 1). Only the number of loops
specified at the time of purchase appear in the list.
• Hysteresis
Set each of 4 alarms in the range of “measurement span of EUS (0.0-10.0%).”
However, for the hysteresis for output high limit (OTH) or output low limit (OTL), the
output range is set from 0.0 to 10.0%. The available setting range appears in the
pop-up window.
4.13 Hysteresis (Alarm)
Advertising