Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 81)

1-69
IM 04L31A01-01E
Explanation of Functions
3
2
1
4
5
6
7
8
9
10
11
12
13
14
Operation Display
This display is used to monitor the operation status and carry out control operations such
as running and stopping the operation.
• Control Group Display (Controller Style) for Monitoring the Control Status and
Performing Control Operations
• Trend Display of Measured Data
Display Construction
The display consists of the operation status indication section, data display section, and
the soft key menu. However, on the measurement operation display, the [FUNC] key
must be pressed to show the soft key menu.
[Control Group Display (Faceplate Style) Example]
Operation status
display section
Control data
display section
Soft key menu
• Operation Status Indication Section
The following information is displayed in the status display section during operation
mode and setting mode. (The information is not displayed during basic setting mode.
[Setup Mode] is displayed instead.)
1.16 Display Function