INFICON IC6 Thin Film Deposition Controller - Manual (Page 130)

6 - 2
PN
07
4-
50
5-
P1
F
IC6 Operating Manual
Processes that have at least one layer programmed are identified by a "greater
than" character (>) beside the process number. Only processes with layers can be
made active. The active process is shown in the status area. When Start is initiated,
the layer sequence in that process will be executed. At end-of-process, to activate
another process move the cursor to the process number and press F2 Set Active
Process. To edit or create a process, move the cursor to that process number and
press F1 Select Process.
6.3 Curr(ent) Proc(ess) Page
The Current Process page, see Figure 6-2 , shows the layer sequence for the
process.
NAME. . . . . . . . . . . . . . . . . . . . . . . . 15 characters max
The default will be Process #. The default name is returned as a blank entry when
queried via communications. The Name can be edited using the keys in cell-phone
fashion
Figure 6-2 Current process page