2 crucible indexer connections, 3 dac option kit 781-504-g1 – INFICON IC6 Thin Film Deposition Controller User Manual
Page 50
2 - 8
PN
07
4-
50
5-
P1
F
IC6 Operating Manual
2.3.2.2 Crucible Indexer Connections
Example: 4 pocket crucible using outputs 6 and 7
Number of crucibles = 4
Crucible output = 6
For this example, wiring to the controller is based on
. Only relays 6 and
7 are needed to encode the four possible positions.
2.3.2.3 DAC Option Kit 781-504-G1
An optional Digital to Analog Converter (DAC) card can be installed into the IC6.
This card provides six additional DAC outputs, numbered 7 through 12, for
Thickness and/or Rate as determined by the DAC Output Option parameters. The
pin assignments for DAC outputs 7 through 12 are shown in
.
A mating connector is included with the DACoption
Table 2-1 Wiring to the controller
Crucible
Position
Contact Status
Relay #6
Relay #7
1
Open
Open
2
Closed
Open
3
Open
Closed
4
Closed
Closed
Table 2-2 Optional DAC pin assignments
Output
Number
Pin
7
1, 6 (GND)
8
2, 7 (GND)
9
3, 8 (GND)
10
4, 9 (GND)
11
5, 10 (GND)
12
11, 12 (GND)