6 crystal snatcher, 7 crystalsix (xtalsix) – INFICON IC6 Thin Film Deposition Controller User Manual
Page 300
Advertising
15 - 30
PN
07
4-
50
5-
P1
F
IC6 Operating Manual
15.8.6 Crystal Snatcher
Use the crystal snatcher, supplied with the sensor, as follows:
1
Insert crystal snatcher into ceramic retainer (1) and apply a small amount of
pressure. This locks the retainer to the snatcher and allows the retainer to be
pulled straight out (2). See
2
Reinsert the retainer into the holder after the crystal has been replaced.
3
Release the crystal snatcher with a slight side-to-side motion.
Figure 15-6 Use of the crystal snatcher
15.8.7 CrystalSix (XtalSix)
Refer to the Crystal Six Operating Manual (IPN 074-155) for specific instructions
for this device.
Advertising