INFICON IC6 Thin Film Deposition Controller - Manual (Page 25)

1 - 5
PN
07
4-
50
5-
P1
F
IC6 Operating Manual
1.2.4 Main Power Connection
WARNING - Risk Of Electric Shock
This IC6 has line voltage present on the primary circuits
whenever it is plugged into a main power source.
Never remove the covers from the IC6 during normal
operation.
There are no operator-serviceable items within this IC6.
Removal of the top or bottom covers must be done only
by a technically qualified person.
In order to comply with accepted safety standards, the
IC6 must be installed into a rack system which contains
a mains switch. This switch must break both sides of the
line when it is open and it must not disconnect the safety
ground.