INFICON IC6 Thin Film Deposition Controller - Manual (Page 180)

10 - 10
PN
07
4-
50
5-
P1
F
IC6 Operating Manual
10.3.2.1 REAL_xXx and REAL_xFx
 Real numbers contain a decimal point.
 The resolution (or decimal precision) of the real number displayed depends on
the format code.
 The stored value is a floating-point number.
10.3.2.2 TIME
 Time format is used for times with minutes and seconds.
 Time parameters are displayed as MM:SS.
 They are stored in memory as integer seconds.
10.3.2.3 ENCODE
 Encode parameters have a defined list of acceptable values.
 Usually two to five values are allowed.
 As the user toggles through the list the encoded text is displayed on the screen.
 The value stored is an integer.
10.3.2.4 INTEGER
 Integers are 32-bit words.
 Although they are stored as signed integers, all our current parameters have a
lower limit greater than or equal to 0.
10.3.2.5 LOCKCODE
 The lock code parameter is displayed as "XXXX".
 The value is stored as an integer.
 Unlock code is 0.
REAL_5X3 XX.XXX
REAL_6F32 XXX.XXX or XXXX.XX
TIME MM:SS (Minutes:Seconds)
ENCODE Displays text from a Toggle list
INTEGER Whole number (no decimal point)
LOCKCODE XXXX
Table 10-1 Format code (continued)
Format Code Displays the value as