Rockwell Automation 20D PowerFlex 700S AC Drives with Phase II Control Programming Manual - Manual (Page 139)

Rockwell Automation Publication 20D-PM001C-EN-P - July 2013 139
Chapter
3
Troubleshooting
This chapter provides information to guide you in troubleshooting the
PowerFlex 700S drive. A list and description of drive faults (with possible
solutions, when applicable) and alarms is included.
Status Indicators The condition or state of your drive and DriveLogix controller (if installed) is
constantly monitored. Any changes will be indicated through the front panel
LEDs and/or the HIM (if present). See Drive Status Indicators on page
140 for
more information. The DriveLogix option also provides a RUN LED and the
controller LEDs that indicate the state of the controller. See DriveLogix5730
Controller Status Indicators on page
141 for more information.
Topic Page
Status Indicators Below
HIM Indication of a Fault 144
Manually Clearing Faults 144
Fault and Alarm Types 144
Fault/Alarm Descriptions 145