Summary of changes, New and updated information – Rockwell Automation 20D PowerFlex 700S AC Drives with Phase II Control Programming Manual User Manual
Page 3
![background image](/manuals/576845/3/background.png)
Rockwell Automation Publication 20D-PM001C-EN-P - July 2013
3
Summary of Changes
This manual contains new and updated information.
New and Updated
Information
This table contains the changes made to this revision.
Changes to this manual for previous revisions are included in Chapter F History
of Changes on page
Topic
Page
Updated the list of Additional Resources.
Updated the description of parameter 338 [Mtr I2T Spd Min] to include setting it to the
minimum value for the motor overload trip to vary in time at low speeds.
Updated the description of fault 15 “Inv OTemp Trip” to include a possible juntion temperature
fault condition.
Removed the “Input Voltage Range/Tolerance” topic from Chapter B Application Notes.
Added a note to the “Inverter Overload IT” block diagram for parameter 338 [Mtr I2T Spd Min].