Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 100)

100 Publication 2711-UM014G-EN-P - September 2008
Chapter 3 Configuring the Terminal
Align Touch Grid - PV1400 Touch Screen Terminal only
Opens the touch alignment screen, which lets you realign the screen
with the touch grid. This function is useful when the terminal is
positioned at an angle and viewing the screen is difficult unless you
realign the screen.
Move the screen until it aligns with the touch cells. Alignment changes
are permanent.
Exit
Returns to the Configuration Mode menu.
Set the Time and Date Select Date/Time from the Configuration Mode menu to reset the date
and/or time.
Press To
Move the screen up one pixel.
Move the screen down one pixel.
Move the screen to the right two pixels.
Move the screen to the left two pixels.
Move the screen to its factory default position.
Exit Exit the touch alignment screen and return to Screen Setup.
F16
EXIT
Year
#### Month
####
Day
####
Hour
####
Minute
####
Second
####
M MM/DD/YYYY M HH:MM:SS PM
F16
EXIT
DATE/TIME
F1 F3
F9 F10 F11
F2