Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 115)

Publication 2711-UM014G-EN-P - September 2008 115
Running Applications Chapter 5
•
All push buttons are momentarily disabled (0.5 second) after a
screen change. This prevents multiple buttons, in the same
location on different screens, from being pressed inadvertently.
•
All push buttons must be released on the previous screen before
buttons can be pressed on the new screen.
•
Momentary push buttons are assigned a hold time. The hold
time maintains the pressed state so that each change of state can
be read by the controller at least once. The hold time varies
between 0 and 1 second depending on the configured setting.
Control Lists Control lists perform functions similar to push buttons. They can
modify either individual bits or values at a controller address.
Active List Item
Active item is highlighted.
Active selection is
highlighted.
Cursor indicates selected item.
Vertical bar indicates active control list.