Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 197)

Publication 2711-UM014G-EN-P - September 2008 197
Terminal Connections Chapter 12
Cable Cat. No.
1747-C10 Cat. No.
1747-C11 Cat. No.
1747-C20
Personal Computer
Interface Converter
(Cat. No. 1747-PIC)
25-pin to 9-pin
Adapter (if
required)
Wallmount Power Supply
Cat. No. 1747-NP1
PanelView 1000 PanelBuilder32
To DH-485
Programming Connector
To DH-485
Communication Port
Connecting a Computer to DH-485 Connector Using a Power Supply
Connecting a Computer to DH-485 Connector Using a DH-485 Powered Device
Personal Computer
Interface Converter
(Cat. No. 1747-PIC)
25-pin to 9-pin
Adapter (if
required)
SLC 500 or DH-485
Network
Cable Cat. No.
1747-C10 Cat. No.
1747-C11 Cat. No.
1747-C20
To DH-485 Programming
Connector
To DH-485
Communication Port
PanelView 1000
PanelBuilder32
TIP
The computer can connect to any node on the network. It is not
necessary to directly connect the computer to the PanelView
terminal.