Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 73)

Publication 2711-UM014G-EN-P - September 2008 73
Configuring the Terminal Chapter 3
Run Mode
Runs the loaded application.
Reset Video
Resets the video to default settings. The reset video function is useful
if the screen is set to non-viewable settings.
Comm and Fault Status Indicators
The two status indicators on the Configuration Mode menu indicate
the operating state of the terminal. The operating states vary for each
communication protocol (and the PV300 Micro terminal).
See Chapter 13.
Select a Language Press the Language button, [F8] key, from the Configuration Mode
menu to display the Language Selection screen.
The terminal supports five languages.
•
French
•
German
•
Italian
•
Spanish
•
English
TIP
On PV300 and PV300 Micro terminals, scroll down on the main
configuration menu to select a language.
Deutsches Meün auswãhlen
Scagliere Italiano
Escoger Español
Select English
Choisir Français
FIN
EXIT
USCITA
SALIR
EXIT