Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 202)

202 Publication 2711-UM014G-EN-P - September 2008
Chapter 12 Terminal Connections
Connecting a DH+ to DH-485 Pass-through Link
This section shows connections for transferring applications between
a computer on the Allen-Bradley DH+ link and an RS-232 (DH-485)
PanelView terminal, through an SLC 5/04 controller.
The RS-232 (DH-485) communication port on the terminal connects to
the CH0 port of the controller using one of the cables listed below.
RS-232 (DF1) Terminal
Connections This section describes connections for the RS-232 (DF1) versions of
the PanelView terminal including:
•
compatible controllers
•
RS-232 terminal ports
•
connecting to a controller (point-to-point)
•
using a modem
•
connecting to a DeviceNet or EtherNet/IP network
To 1784-KT/B Port
To CH1 Port
To CH0 Port
SLC 5/04 Processor
Cable Catalog No.
2706-NC13, 2711-NC13,
2711-NC14
DH+ Network Cable
Catalog No. 1784-CP6 or
Catalog No. 1784-CP
with 1784-CP7 Adapter
To RS-232 Communication Port
PanelView 1000
Computer with PanelBuilder32
TIP
For PanelView 300 Micro terminals, refer to page 218.