Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 193)

Publication 2711-UM014G-EN-P - September 2008 193
Terminal Connections Chapter 12
The DH-485 communication port and programming connector may
appear in different locations on specific terminals. Identify the ports
by their size and shape or by the port labels.
Connecting to a Single SLC Controller (Point-to-point)
To connect a DH-485 terminal to a single SLC controller use one of
these cables:
•
0.3 m (1 ft) Cat. No. 1747-C11
•
1.83 m (6 ft) Cat. No. 1747-C10
•
6.1 m (20 ft) Cat. No. 1747-C20
RS-232 Printer
Port
DH-485
Communication Port
DH-485 SLC
Programming Port
DH-485
Communication Port
RS-232 Printer Port
DH-485 SLC
Programming Port
DH-485 Communication Port
SLC 500 Communication Connector
Cable, Catalog No. 1747-C10
Cable, Catalog No. 1747-C11
Cable, Catalog No. 1747-C20
To PanelView Terminal 8-pin
Female Plug
Connection Diagram
1
2
3
4
5
6
7
8 1
2
3
4
5
6
7
8
Connect to: Pin # Pin #
To SLC Communication Connector
8-pin, Male, Modular Plug
Side shown is opposite latch
Pin 1
Pin 8
Pin 1
Pin 8
SLC
PanelView 1000