Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 107)

Publication 2711-UM014G-EN-P - September 2008 107
Using a Memory Card Chapter 4
The memory card retainer protects against:
•
electrical shock from loose high voltage wires in an electrical
enclosure per UL508.
•
electrostatic discharge (ESD) up to 15KV.
•
accidental removal or ejection of the memory card from the card
slot.
ATTENTION
When permanently installing a memory card in an
electrical enclosure, the memory card retainer must be
used to avoid accidental contact of high voltage leads to
metal surfaces on the card. Failure to use the retainer
could result in physical injury or damage to the terminal.
ATTENTION
Without the memory card retainer installed,
electrostatic discharge could reset or damage the
PanelView terminal.
ATTENTION
Accidental removal of an ATA flash card from the card
slot could result in damage to the card.