Cutout dimensions, Clearances, Cutout dimensions clearances – Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual User Manual
Page 135
Advertising
![background image](/manuals/580227/135/background.png)
Publication 2711-UM014G-EN-P - September 2008
135
Installing the PV300 Micro Terminal Chapter 6
Cutout Dimensions
Use the full size template shipped with the PV300 Micro terminal to
mark the cutout dimensions. The figure below shows a reduced scale
cutout. A full scale template is also available inside the back cover of
this document.
Clearances
Allow 51 mm (2.0 in.) of space on all sides of the terminal for
adequate ventilation and maintenance.
112 mm (4.42 in.)
102 mm (4.0 in.)
92 mm
(3.62 in.)
54 mm
(2.12 in.)
4.5 mm (0.178 in.)
diameter
51 mm (2.0 in.)
Side, Top and Bottom Clearances
51 mm (2.0 in.)
Advertising