Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 71)

71 Publication 2711-UM014G-EN-P - September 2008 71
Chapter
3
Configuring the Terminal
Chapter Objectives This chapter shows how to use the Configuration Mode menu to
configure terminal settings and perform operations including how to:
•
access the Configuration Mode menu.
•
select a language.
•
use a memory card.
•
configure communication (DH485, DH+, remote I/O,
ControlNet, DeviceNet, DF1, EtherNet/IP).
•
configure presets.
•
view terminal information.
•
set the time and date.
•
adjust display parameters.
•
set up the printer.
Application Settings Configuration parameters are set from the terminal or from the
PanelBuilder32 software when creating the application. Settings
downloaded with the application have priority over terminal settings if
the following option is enabled in the Terminal Setup dialog of the
PanelBuilder32 software.
In addition, the application may allow the controller to change the
following while the application is running:
•
time and date
•
current display screen
•
piloted control lists
x Use Downloaded configuration settings