Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 29)

Publication 2711-UM014G-EN-P - September 2008 29
Terminal Overview Chapter 1
PanelView 550 Terminal
Features This section defines features of the PanelView 550 terminals.
PanelView 550 Terminal Features (front)
Keypad Terminal Keypad & Touch Screen Terminal
Touch Screen Terminal
4 3
1 2
5
6
5
6
Cell 113 Cell 128
Cell 1
Cell 16
Cell 1
Cell 113
Cell 16
Cell 128
# Feature Description
1 Function Keys (F1…F10) On keypad terminals, use the function keys to initiate functions on the terminal
display. These keys may have custom legends.
On keypad and touch screen terminals, you can initiate functions by using the
function keys and/or touch screen objects.
2 Cursor Keys Use the cursor keys to move the cursor in displayed lists, to select a numeric entry
object, or to enter configuration mode.
3 Numeric Entry Keys 0…9 - Enters numeric values.
. Enters a decimal point.
- Enters a negative value.
←
Clears entered digits or cancels the scratchpad.
↵
Stores an entered value.
4 Keypad Terminal Display On keypad terminals, initiate the function of a displayed object, such as an ON or
OFF push button, by pressing a function key (F1…F10).
5 Touch Screen Terminal Display On touch screen or keypad & touch screen terminals, initiate the function of a
displayed object, such as an ON or OFF push button, by touching the screen object.
Each interactive screen object occupies one or more of 128 cells.
On keypad and touch screen terminals, you can initiate functions by using the
function keys and/or touch screen objects.
6 Touch Cells (Touch Screen terminal) The 128 touch cells (16 columns x 8 rows) let you initiate functions by touching
the screen. Interactive screen objects are aligned with touch cells when the
application is created.